Rabu, 27 November 2013

Guide to Choosing the Right BaoFeng UV-5R 136-174/400-480 MHz Dual-Band Ham Radio (Black)

Product Description

This BAOFENG UV-5R transceiver is a micro-miniature multiband FM transceiver with extensive receive frequency coverage, providing local-area two-way amateur communications along with unmatched monitoring capability

Product Details

  • Color: Black
  • Brand: BaoFeng
  • Model: UV-5R
  • Dimensions: 3.70" h x 6.50" w x 8.40" l, 1.15 pounds

Features

  • Dual-Band Display, Dual Freq. Display, Dual-Standby
  • 25KHz/12.5KHz Switchable
  • Channel Step: 2.5/5/6.25/10/12.5/25KHz Frequency Range: 136-174 / 400-480MHz
  • 128 Channels 50 CTCSS and 104 CDCSS
Customer Reviews

Most helpful customer reviews

46 of 49 people found the following review helpful.
StormWind (Baofeng) UV5 Transceiver
By David Schattilly
I talked to a Chinese student here at my college and this translated out to Stormwind which is an interesting name for a company. Now to the review.

This transceiver is very nicely made. I would thought that for the price it would be broken easily espeically when it came with a strap, ear/microphone and a charger. Now this transceiver is not for the beginner ham who doesn't have experience with programming this radio. It is highly suggested that if you buy this rig, that you get a programming cable so it is easier to program. Since the repeater offset is only good in Frequency mode, channel mode it does not save to memory.

In order to save to memory you first put in the RECEIVE frequency then Transmit frequency. Now be sure to put in the T-CTS (menu 13) or if the repeater transmits a tone then you set the R-CTS (Menu 11) For example 147.280 uses CTCSS then you would set Menu 11 and Menu 13 to the same tone. which is set in each menu item and it always starts from 67.0 even if it is set to say 100.0 good The good thing is you can type the tone in eg. 1035 will input the tone of 103.5hz before saving to the memory. Then after saving that you then have to set the offset frequency which will be 147.880 and save it to the same memory channel. When you save the receive frequency into the memory it will confirm by saying "Receiving memory." and the offset frequency by saying "Transmitting memory" and to confirm the settings exit the menu and switch to Memory mode and go to the channel you saved. It will show a +- on the top of the display. Then if all is set right you should be able to access the repeater.

You have to repeat this for every channel you program. It is fine if you have 5 repeaters in your area, but very tedious if you have 25. This is why the usb programming cable is a must. This package has the handstrap even though it does not state that like other sellers do. For a radio around $50.00 it is an excellent buy for the cash strapped ham. Also a huge suggestion if you need to hear the repeater tail you must turn the STE from 5(ms) to 0(MENU 35) and RP_STE to off (MENU 36) and RPT_RL (MENU 37)

Pros:
Bright display.
Flashlight Feature (tap MONI to turn on and off this is NOT in the manual)
FM Radio Feature (Tap CALL to turn on and off this too is NOT in the manual)
5W/1W Transmitter both bands.
Dual-Watch (Suggesting that you set your TRANSMIT BAND TO A or B not OFF in MENU 34 otherwise you may transmit on the wrong band)
Color led display for TX/RX/Idle (Orange/Blue/Purple) Menu settings 29-31
Green/Red square LED to indicate Rx/Tx respectively.
Very loud receiving speaker. 1000mw. First time I owned a radio this loud.
1800mAh Battery for long standby time and a decent talk time.
Earpiece Microphone. (watch the volume level it can blast your ear out)
Drop-in Charger.

Cons:
Very limited manual.
Difficult/tedious programming scheme.
F-SMA (Reverse SMA) can be adapted from F-SMA to M-SMA for wider compatibility with an adapter there are also F-SMA to BNC as well as F-SMA to SO-239 ones that can expand types of antennas used.
This has an unlocked transmitting range on both bands so be careful if you use as a scanner, you may accidently transmit in areas you are not authorized.
Slow Scanning speed despite what the manual says.

61 of 67 people found the following review helpful.
AMAZING RADIO
By Mike Reingold
I am a bit of a geek when it comes to radios. But I am not a programmer. I figure for $50 what can I lose. I was blown away by the quality, the features and even the well printed manual. Buy the USB cable and download the software. I was up and running in 10 minutes after I charged the battery. This radio has more features then my Vertex VX5 which was 10x the price. I run security in a hospital, and when someone steals or loses a Motorola I am out hundreds of dollars. There is no compromise here, this radio works, and had no trouble hitting the repeaters.

Like the vodka ads they ran in NYC and had to take down. "ESCORT QUALITY AT HOOKER PRICES" !!!! That sums this radio up. I agree with all of the positive feedback by others regarding this radio. When the Zombies come now I got my radios, my ammo and some food. What more do I need :)

Mike

25 of 25 people found the following review helpful.
Tiny package...packs a big punch !
By Slorigami7
I purchased 2 of these for "Just in case" in my camper, figuring for the price, as long as we could talk to each other across a couple of miles in an emergency, they would be worth the $ 100.00 for the pair.I ordered them on Wednesday, Amazon had them at my door on Thursday ! They were in a tiny little box about the size of a shoe box, so I didn't even bother to open it at first, figuring it was a pair of shoes that my wife was waiting for.
I got in a little trouble when she opened the box and found no shoes, but once I retreated to the back room and started to play with them, I was stoked ! First of all, these little radios are solidly built, I would compare them to my Vertex. They claim to pack 5 watts max, and my subjective test of sending my daughter for a ride around the neighborhood while trying to talk puts them a couple of notches above the typical GMRS " 32 mile range" radios. With a set of Motorola GMRS/FRS radios, we could talk at 1.2 miles away if the monitor button was on ( This is way less than the 32 mile claim) With these little Baofengs, we were talking clearly at 1.6 miles...still clear at 2.5 miles, then static started to take over at 3.0 miles. Now mind you, this is in the absolute worst place with little valleys and hills all over...all in all, way better than the $85.00 Motorolas. All in all, if you need a cheap little radio to talk for 3 to 5 miles, you can't go too far wrong with these. Thanx for reading.

See all 234 customer reviews...

Best Price Arkon Tablet Windshield Mount (TAB-CM117)

Product Description

Arkon's windshield mount allows easy mounting and positioning of the Samsung Galaxy Tab and others and is the best tablet mount of its type. Use navigation, maps, hands-free voice or other useful travel apps.

Product Details

  • Brand: Arkon
  • Model: TAB-CM117
  • Released on: 2013-07-28
  • Number of items: 1
  • Dimensions: 3.00" h x 6.00" w x 16.00" l, .90 pounds

Features

  • New innovative, adjustable tablet holder fits any tablet 7 to 12-Inch with or without a case or skin
  • Features a locking, telescopic mounting arm, extends 14.5 to 18.5-Inch
  • Swivel ball connection for 360 Degree rotation with tilt for portrait or landscape viewing
  • Compatible with iPad & iPad 2 Samsung Galaxy Tab 7-Inch 8.9-Inch 10-Inch, Motorola Xoom HTC Flyer / EVO View 4G ASUS EeePad Transformer Acer Iconia Toshiba Thrive Lenovo Idea Pad Blackberry Playbook HP TouchPad and more
  • No Tools required easy install
  • 16"-24" rigid extension windshield suction pedestal for tablets
  • Designed to be compatible with nearly all tablets including the iPad, iPad 2, Dell Streak 7, Motorola Xoom, HTC Flyer & more
  • Features spring-loaded universal tablet holder
  • Fits nearly all vehicles having 2 post headrest configurations
  • Fits tablet even when used with protective skin or sleeve on it
Customer Reviews

Most helpful customer reviews

30 of 31 people found the following review helpful.
Great for IPad 2
By Commuter
I am a college commuter. I drive an two hours four days a week for school. I wanted a mount for my ipad and after looking at tons was between this and a more permanent one. I bought this hoping it would work well. I am thrilled with this product. It suctions to the windshield and the arm rests on the dash. The telescoping arm pulls out so the tablet rests just beyond the dash. The angle is adjustable and able to be tightened.

I don't have any issue with the tablet moving while driving or using it on the road. for the price it can't be beat. The only reason for the four stars is the bracket is a little cumbersome to get your tablet in and out of. To hold any tablet the manufacturer made the bottom spring-loaded. It's a strong spring to make sure the tablets not loose but makes it hard to get the ipad in and out. Another note is I don't know how it would do holding a tablet vertically I always put mine in landscape mode.

Hope this helps.

20 of 22 people found the following review helpful.
Passable for the price.
By RKelly
I work in the IT field and I need to access my iPad and windows 7 tablet from my car on a regular basis. I was hoping this allow me to keep them at the ready for when I needed them, which it "technically" does. It is easy to assemble, and it comes with short and long fasteners which allow you to use it with different size tablets or use it with your tablet (iPad) with or without the case. The fasteners hold the my tablets firmly in place, the issue is the arm that extends back to your windshield, it is flimsy, and the suction cup is little more than what holds my small Garmin GPS in place. The arm absolutely has to be propped up against the dashboard to even do a passable job at holding my tablets in place. Even propped against the dashboard, my iPad sways to and fro quite a bit while moving and even when the car is stopped, it still shakes/jitters more than I'm comfortable with and no amount of adjusting helped.

As the title states, this mount does a passable job for what it costs, it does feel flimsy and somewhat cheaply made, and allows more jittering/shaking than I would like, but I didn't really expect champaign on soda pop prices.

RK

14 of 15 people found the following review helpful.
Excelent device!!!
By Jorge Perez Carrion
Excelent device!!!

Good materials, very practical and adaptable, fits wonderfully!!! I fully recomended to people searching not only a windshield mount but this thing is more versatil, I can put it in the window of my kitchen to watch videos while Im there or on the table, closet, mashiwasher, etc. Its perfect.

See all 125 customer reviews...

Best Product From Air Vent Car Mount Holder for iPhone 5 Samsung Galaxy S4 S3/SIII Note 3 Motorola Moto X and Other Smartphones

Product Description

The SM429-SBH air vent car mount is ideal for use with the iPhone 5S and 5C, the Samsung Galaxy S4 and previous Galaxy S phones, and Galaxy Note 3. The universal design of the holder accommodates any smartphone having up to 3.25” width with no height restrictions, making it compatible even when used with a large protective case or skin. It includes Arkon’s Mega Grip one touch push-button holder and air vent mount with swivel ball head. The air vent mount clips onto any horizontal car air vent louvers, and a support leg rests on the bottom of the vent for added reinforcement. The holder’s unique side-grip technology provides a strong grip that’s easy to use. Just set your phone in the mount and close the arms to lock in place. A push of the holder’s side button releases the phone. The swivel ball head of the air vent mount provides 360° rotation, giving you the ultimate flexibility in viewing the smartphone from any angle. Garmin GPS devices can also be mounted to the car’s air vent by simply unscrewing the swivel ball adapter and revealing the 17mm ball mount base. Replacement air vent clips are provided directly by Arkon under a limited lifetime warranty.

Product Details

  • Amazon Sales Rank: #5619 in Cell Phone Accessories
  • Color: Black
  • Brand: Arkon
  • Model: SM429SBH
  • Format: CD-ROM
  • Number of items: 1
  • Dimensions: 4.00" h x 1.50" w x 2.00" l, .30 pounds

Features

  • Side-grip arms close to 2.25 inches and open to 3.25 inches
  • Fits most smartphones, even those with a protective case
  • Mount clips onto air vents with added support leg for extra stability
  • Supported by Arkon?s lifetime limited warranty
Customer Reviews

Most helpful customer reviews

23 of 23 people found the following review helpful.
iPhone 4 with Otterbox Defender
By J. Bair
This is a great little vent mount! I needed something to hold my phone when I was driving. There's a little pocket where I can place my phone while driving (Volvo S60) but you can't see the screen. This fit the bill perfectly. The load bearing piece on the bottom lines up great and holds the weight well. Some notes for my specific config:

1. The holder does bounce a bit since it uses the weight of the phone to hold it in place. Though it's not much, it's worth noting. It only really goes *up*. never down. The mount itself grabs on very well in the S60.
2. Pivoting from Portrait to Landscape requires you to pull out on the mount. It's not immediately obvious, but after fiddling around I figured it out.
3. In my specific application (Otterbox case + iPhone 4), the phone is too heavy for landscape. The mount pivots up/down in landscape and left/right in portrait; as a result, when in landscape, the mount just sags down. There isn't enough feedback to hold it up. Not a huge deal, but not optimal.

Due to #3, it gets 4/5 stars. Still, it's a really great mount for my application and works awesome. I use it in Portrait and may just use some super glue to allow landscape viewing (I don't need to adjust the angle at all anyway). Hope this is helpful to others looking at this holder!

20 of 20 people found the following review helpful.
Nice grip, but..
By Gilf
Update: Just bought another for my wife's car. First stand I had to last so long.

This holder fits all the devices I currently have (iPod, Nokia N900, Nokia N8 and Nexus S), and the grips also allows to put the thinner devices in landscape mode for navigation.
The vent grips, however are not maneuverable enough to fit in any car. Fitted in a Mazda and Ford Explorer, but not in Hyundai vents. Make sure your vents flaps are horizontal and located as much to the center of the dashboard, otherwise you might be disappointed.

21 of 25 people found the following review helpful.
Easy to view, but
By Todd
I was looking for an Iphone mount without having something attached to my windshield for my 2001 Mustang. I bought the Arkon SM429-SBH because I liked the flexibility of viewing angles it provided.

I received without instructions, which is no big deal. I got them from their website. The instructions contradicts itself from the picture of the mount itself and the assembly instructions. The bottom support is shown one way in the picture and shown differently in the instructions. The viewing position in my car is just right. The mount held my Iphone with an Otter Box case in padded collapsible side braces with a convenient release button to remove the phone. The mount blocks my climate controls a little but with the distance it is set away from the dash I can still adjust them by reaching under the mount. I can easily change from portrait to landscape. The friction knob at the pivot works good. It has a good range of viewing angles.

The problem with this mount is the bottom support just dosen't cut it. With the mount in place without a phone the vent louvers can be adjusted without a problem. Once you put the phone in the weight pushes the vent louvers all the way down. If the lower support that rests on the dash had more resistance it would support the phone better and allow vent louver adjustment.

See all 200 customer reviews...